Product Details:
Payment & Shipping Terms:
|
| Model: | Male And Female Heat Shrink Tube | Material: | Pure Copper,thin Copper,brass |
|---|---|---|---|
| Color: | Red Blue Yellow | Wire Range: | 0.5-1.5mm2 1.5-2.5mm2 4-6mm2 |
| Surface: | Tin Palting | Wire Range: | 22-16AWG 16-14AWG 12-10AWG |
| High Light: | electrical terminal connectors,heat shrink butt connectors |
||
Heat Shrink Insulated Male and Female Terminals and connectors
Applications
HSRT and HSY made by polyolefin, with adhesive lining for protecting splices from water and corrosion. Providing strain relief and against vibration in rugged environment, which completely insulates and protects terminations and other electrical components. In the end of the splice is high pure copper sheet, with excellent conductivity property. HSRT and HSYT offers long-term performance, easy installation, and a low installed cost, which is more reliable than conventional crimp terminals.
Characteristics
Shrink ratio 3:1
Hot-melt adhesive provides excellent waterproof property.
Excellent stretch and mechanical damage resistance.
High tensile strength
Good conductivity property.
High elasticity keeps steady performance
Operating Temperature Range
Operating temperature: -55°C~125°C
Minimum shrink temperature: 80°C
Minimum fully recovery temperature: 130°C
| Test item | Characteristics | Test condition | |
| Unaged | Tensile strength | Min. 16MPa | Room temp. |
| Elongation | Min. 200% | ||
| Aged | Tensile strength | Min. 11.5MPa | 158℃/7 days |
| Elongation | Min. 100% | ||
| Voltage withstand and breakdown Voltage(Unaged) | Withstand 2.5 KV for 1minute and breakdown | Room temp. | |
| Voltage withstand and breakdown Voltage(Aged) | Withstand 2.5 KV for 1minute and breakdown at least half of unaged breakdown voltage | 158℃/7 days | |
| Copper corrosion | No corrosion of bare copper | 158℃/7 days | |
| Copper stability | No sign of degradation Min.Elongation 100% | 158℃/7 days | |
| Cold bend | No crack | -30℃/4 hrs | |
| Maximum secaht modulus(2%) | 250 MPa | - | |
| Volume resistivity | Min.1014Ω-cm | - | |
| Heat shock | No crack | 250℃/4 hrs | |
| Item No. | Wire range mm2/Awg |
Tab Size | Dimension(mm/inch) | Insulation Color |
Q’TY Bag |
|||
| C | W | L | D | |||||
| MDD 1.25-110(5) | 0.5-1.5mm2 22-16AWG |
2.8 x 0.5 | 1.7 | 2.75 | 30 | 4.8 | Red | 1000 |
| MDD 1.25-110(8) | 2.8 x 0.8 | 2.75 | 30 | 1000 | ||||
| MDD 1.25-187(5) | 4.8 x 0.5 | 4.75 | 32 | 1000 | ||||
| MDD 1.25-187(8) | 4.8 x 0.8 | 4.75 | 32 | 1000 | ||||
| MDD 1.25-250 | 6.4 x 0.8 | 6.35 | 32.5 | 1000 | ||||
| MDD 2-187(5) | 1.5-2.5mm2 16-14AWG |
4.8 x 0.5 | 2.3 | 4.75 | 32 | 5.8 | Blue | 1000 |
| MDD 2-187(8) | 4.8 x 0.8 | 4.75 | 32 | 1000 | ||||
| MDD 2-250 | 6.4 x 0.8 | 6.35 | 32.5 | 1000 | ||||
| MDD 5.5-187 | 4-6mm2 12-10AWG |
6.4x 0.8 | 3.4 | 6.35 | 32.5 | 6.8 | Yellow | 1000 |
| MDD 5.5-250 | 6.4x 0.8 | 3.4 | 6.35 | 32.5 | 1000 | |||
| Item No. | Wire range mm2/Awg |
Tab Size | Dimension(mm/inch) | Insulation Color | Q’TY Bag |
|||
| C | W | L | D | |||||
| FDD 1.25-110(5) | 0.5-1.5mm2 22-16AWG |
2.8 x 0.5 | 1.7 | 3.2 | 31.5 | 4.8 | Red | 1000 |
| FDD 1.25-110(8) | 2.8 x 0.8 | 3.2 | 31.5 | 1000 | ||||
| FDD 1.25-187(5) | 4.8 x 0.5 | 5 | 32 | 1000 | ||||
| FDD 1.25-187(8) | 4.8 x 0.8 | 5 | 32 | 1000 | ||||
| FDD 1.25-250 | 6.4 x 0.8 | 6.6 | 32.5 | 1000 | ||||
| FDD 2-110(5) | 1.5-2.5mm2 16-14AWG |
2.8 x 0.5 | 2.3 | 3.2 | 31 | 5.8 | Blue | 1000 |
| FDD 2-110(8) | 2.8 x0.8 | 3.2 | 31 | 1000 | ||||
| FDD 2-187(5) | 4.8 x 0.5 | 5 | 32 | 1000 | ||||
| FDD 2-187(8) | 4.8 x 0.8 | 5 | 32 | 1000 | ||||
| FDD 2-250 | 6.4 x 0.8 | 6.6 | 32.5 | 1000 | ||||
| FDD 5.5-187 | 4-6mm2 12-10AWG |
4.8 x 0.5 | 3.4 | 5 | 29 | 6.8 | Yellow | 1000 |
| FDD 5.5-250 | 6.4 x 0.8 | 6.6 | 32.5 | 1000 | ||||
Contact Person: Mr. Lulu
Fax: 86-0577-62980981
